Syltech 10 Bar Oil & Fuel Pressure Sensor, 1/8 NPT, DTM

A 10 bar fuel pressure sensor from Syltech, available as a direct-fit accessory for the Nuke Performance FPR100 series fuel pressure regulators.

The Syltech 10 Bar Fuel Pressure Sensor threads directly into the 1/8 NPT gauge port on Nuke Performance FPR100 series regulators. Connect it to a compatible ECU or data logger to monitor fuel pressure under load and review pressure changes in your logs. The sensor can also be used to measure engine oil pressure.

 Direct fit for Nuke Performance FPR100 series regulators
 0–10 bar (0–145 PSI) gauge pressure range
 304L stainless steel body with a laser-welded seal
 1/8″-27 NPT male thread
 5 V DC supply and linear 0.5–4.5 V DC output
 ±0.5% full-scale accuracy
 Uses a Deutsch DTM06-3S mating connector

Pin 1 : Sensor ground
Pin 2 : Signal output
Pin 3 : 5 V supply

Pair it with an FPR100-series fuel pressure regulator to monitor fuel pressure under load.
Use the regulator’s existing gauge port for a direct installation with no extra adapters. The linear output is easy to calibrate in a compatible ECU or data logger: 0.5 V at 0 bar and 4.5 V at 10 bar.
Fuel Pressure Regulator FPR100s AN-6 Part # : 300-02-201
Fuel Pressure Regulator FPR100m AN-8 Part # : 300-02-203
Fuel Pressure Regulator FPR100x AN-10 Part # : 300-02-202

Manufactured by Syltech Sensors and offered as an accessory in the Nuke Performance range. Avoid mounting locations subject to high vibration.

Syltech part number : MSPP-3P-G10-N8

 Syltech Data Sheet (.pdf)