- HOME »
- Fuel System Upgrade
- » Competition Fuel Cell Unit
- » Fuel Cell Vent Kit for Dry Break 1.5" setups
Fuel Cell Vent Kit for Dry Break 1.5" setups
Price:
Add ons:
FAST SHIPPING WORLDWIDE FROM OUR HQ IN SWEDEN
60-DAY SATISFACTION GUARANTEE
SAFE AND SECURE PAYMENT METHODS
Product information
A complete high-flow fuel cell ventilation kit required for Nuke Performance 1.5" Dry Break refueling systems. Designed for all Nuke Performance CFC Units.
The Nuke Performance Fuel Cell Vent Kit for Dry Break 1.5" Setups combines a high-flow dual-ball rollover valve with integrated fuel overfill protection and an ultra-lightweight 22 mm BQL quick-connect ventilation system.
High-flow ventilation required for 1.5" Dry Break systems
Dual-ball rollover valve with fuel overfill protection
Ultra-lightweight 22 mm ID BQL quick-connect system
Includes 1.5m (4.9ft) hose for flexible installation
Fits all Nuke Performance CFC Units
Designed to handle the increased airflow during rapid refueling, the kit includes everything needed to upgrade your CFC Unit for Dry Break applications.
High-flow fuel cell ventilation for the Nuke Performance 1.5" Dry Break fuel filler system.
Rapid fuel filling requires significantly higher ventilation capacity than conventional refueling. This kit replaces the original CFC Unit rollover valve with a high-flow version and utilizes a large 22 mm ID ventilation hose to efficiently release displaced air during refueling.
Specifically optimized for the Nuke Performance 1.5" Dry Break filling system, the kit provides the ventilation capacity required for fast, reliable refueling without modifying the CFC Unit.
Optimized dual-ball rollover valve with integrated fuel overfill protection.
The specially developed high-flow rollover valve combines two essential safety functions in a single unit. A stainless steel ball provides rollover protection, helping prevent fuel from escaping through the ventilation system if the vehicle is overturned.
Steel ball for rollover protection in case of an accident
Nylon ball for fuel overfill protection and clear visual indication
A second, fuel-compatible floating nylon ball provides fuel overfill protection. When the fuel reaches the valve during refueling, the nylon ball rises and completely closes the vent passage. The resulting backpressure dramatically reduces the filling rate and provides a clear visual indication that the fuel cell is full and refueling should stop.
Ultra-lightweight BQL quick-connect system, safe for alcoholic fuels such as E85.
Utilizing the Nuke Performance BQL system replaces conventional aluminum AN fittings and heavy braided hoses with lightweight nylon quick-connect fittings and a large 22 mm ID ventilation hose, significantly reducing installation weight.
The kit includes 1.5 meters (4.9 ft) of hose and two straight BQL fittings for flexible routing. Assembly requires only a sharp knife and the supplied special adhesive to secure the hose fittings. All connections are O-ring sealed and compatible with gasoline and alcohol-based fuels, including E85, E100, and methanol.
Easy to install and works with all generations of Nuke Performance CFC Units.
The included high-flow rollover valve replaces the original valve supplied with all Nuke Performance CFC Unit versions. It installs directly through the CFC lid without any modification, but replaces the original rollover valve, so the CFC Unit needs to be separated from the fuel cell if retrofitting to an existing fuel system.
Installation instructions:
- Replace the original CFC Unit rollover valve with the included high-flow dual-ball valve. If already installed, remove the CFC Unit from the fuel cell first. No modifications are required.
- Cut the supplied hose to length using a sharp knife. Attach both BQL quick-connect fittings with the supplied adhesive and allow it to cure before use.
- Connect the BQL hose between the rollover valve and ventilation filter, ensuring all quick-connect fittings are securely attached.
- Route the vent line upwards at least 20cm (0.65ft) from the rollover valve, allowing any fuel entering the line to drain back into the fuel cell.
- Form one loop in the vent line to help manage fuel entering the hose from movement, vaporization, or overfilling.
- Route the vent line towards the front of the vehicle, with the filter ahead of the fuel cell vent connection whenever possible. Avoid heat sources, sharp edges, and moving parts.
- The ventilation filter must be the highest point of the system, positioned above the Dry Break Filler Cap and outside any enclosed compartment.
IMPORTANT: The ventilation filter must always be installed higher than the Dry Break Filler Cap and positioned at the highest point of the vent system. This is essential for proper ventilation and operation of the fuel overfill protection function. The kit is designed exclusively for Nuke Performance CFC Units and is not compatible with other manufacturers' fuel cell units.
Fuel Cell Vent Kit for Dry Break 1.5" setups Specifications:
For more information about specifications, view the product sheet.
| Application | 1.5" Dry Break fuel filling systems |
| Compatibility | All Nuke Performance CFC Units |
| Included vent line | 1.5m (4.9ft) BQL nylon hose, 22 mm ID |
| Hose connections | BQL quick-connect, O-ring sealed |
| Rollover valve | High-flow dual-ball, stainless steel / nylon |
| Fuel overfill protection | YES, floating nylon ball |
| For motorsports use | YES, only for motorsports use |
| Fuel compatibility | Gasoline, Methanol, Ethanol, E85, E100 |
| Included air filter | 150-22-101 (replaceable) |
| Filter connection | AN-10 ORB to BQL 22 Female adapter |
| Filter dimensions | |
| - Diameter | 50 mm (1.96") |
| - Height | 45 mm (1.77") |
| - Weight | 43 g (0.09 lb) |
| Complete kit weight | N/A |
| Part # / EAN | 150-22-222 / 7340209512588 |
Fuel Cell Vent Kit for Dry Break 1.5" setups includes:
1 x Tank Vent Safety Valve for Dry Break setups
1 x Universal air filter with AN-10 ORB thread
1 x AN-10 ORB to BQL 22 Female adapter
2 x BQL 22 Male to BQL hose adapters
1 x 1.5m (4.9ft) BQL 22 convoluted nylon hose
1 x 500 ProBond Instant Adhesive 25 ml
Download Product Sheet (.pdf)
Dry Break Fuel Filler System
Accessories / Spare Parts
Specifications
Specifikationer
-
from € 216,25
-
from € 1924,25
-
from € 617,13




